Surging?
#1
Senior Member
Thread Starter
Join Date: Dec 2003
Location: Toronto Ontario Canada
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Surging?
On my 90 civic i have an issue to settle. When i start the car it runs good. When the temp of the engine increases then it doesnt idle right. I can see the rpm surgin. Also If i hold down the accelerator the ingine doesnt idle properly. The Rpms never stay steady.
Im thinkin either a vacuum leak or improperly gapped plugs.
wut do u think?
Also the check engine light came on.but i noticed when the check engine light was on.it didnt have that^^surging problem... I Didnt think to check my led on my ecu till afterwards..but the light hasnt came bak on as yet...
Im thinkin either a vacuum leak or improperly gapped plugs.
wut do u think?
Also the check engine light came on.but i noticed when the check engine light was on.it didnt have that^^surging problem... I Didnt think to check my led on my ecu till afterwards..but the light hasnt came bak on as yet...
#4
Senior Member
Thread Starter
Join Date: Dec 2003
Location: Toronto Ontario Canada
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
im gonna try checking the pcv.that didnt eve occur to me.i tried checking for a vac leak but i guess it wasnt thorough enough. But its always hard on honda becaause they carry so many vacuum lines
#5
Senior Member
Join Date: Jul 2002
Location: Moncton, N.B. Canada
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
Let me/us know how you made out...you're in Toronto so try Canadian Tire...my pcv valve was $3.99...
(make sure they give you the right one...if you have DPFI it is going to look like a 2.5" piece of pipe that is threaded on one end, if you have MPFI then it will look like a little "L" shaped plastic piece. They go by the engine and the year so if you have swapped in MFPI, go with the year/size [90/1.6] of the engine that the intake came from... )
...Honda wanted $26. The hose if you have to replace that, because it is a 'molded/shaped' hose...you have to get that at Honda...but that will be (should) be under $20. Take out your pcv valve and shake it...if it doesn't "rattle" it should be replaced anyway.
Let us know...good luck.
Jason
(make sure they give you the right one...if you have DPFI it is going to look like a 2.5" piece of pipe that is threaded on one end, if you have MPFI then it will look like a little "L" shaped plastic piece. They go by the engine and the year so if you have swapped in MFPI, go with the year/size [90/1.6] of the engine that the intake came from... )
...Honda wanted $26. The hose if you have to replace that, because it is a 'molded/shaped' hose...you have to get that at Honda...but that will be (should) be under $20. Take out your pcv valve and shake it...if it doesn't "rattle" it should be replaced anyway.
Let us know...good luck.
Jason
#8
Senior Member
Thread Starter
Join Date: Dec 2003
Location: Toronto Ontario Canada
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
ohh.is it the same on my car. That pic u showed me looks like it came outta a car with MPFI .and mine is a little bit different.its the DPFI 1.5L...The pcv hose isnt in the same spot is it?
#9
Senior Member
Join Date: Jul 2002
Location: Moncton, N.B. Canada
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jigga JJ
ohh.is it the same on my car. That pic u showed me looks like it came outta a car with MPFI .and mine is a little bit different.its the DPFI 1.5L...The pcv hose isnt in the same spot is it?
Jason
#10
Senior Member
Thread Starter
Join Date: Dec 2003
Location: Toronto Ontario Canada
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
ohhh so its on da intake?/..lemme go check it ouit jus now.hopefully it is the pcv thats causin all this.....or im also thinkin just a faulty sensor.or also ecu.cause when that check engine light came on.it was running well...maybe an o2 sensor..,.,im not sure as yet.so many possibilllities