Breaking Speedo Cables
#1
Un-Registered User
Thread Starter
Join Date: Jun 2003
Location: Reno NV
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Breaking Speedo Cables
Ok Now ive replaced the Speedo Cable in my car twice, once with a cable out of a 91 Civic but it was a manual so it was a little too short so i figured that is why it broke that one, then i grabbed one out of a accord and it was ALOT longer, and it worked but it also broke, they break about 3 inches down from where it connects to the speedo i know its breaking from the sharp bend right there, but i dont know if i rerouted it wrong or what? does anyone have a picture of how it comes out in the dash? or any suggestions?
Thanks in Advance
-Matt-
Thanks in Advance
-Matt-
#3
Un-Registered User
Thread Starter
Join Date: Jun 2003
Location: Reno NV
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Well Im now im running another accord cable and i rerouted it, the way i had it routed before was wrong and it made too sharp of a curve right behind the speedo, but yaknow thanks for the VERY HELPFUL reply.....made a world of difference..... :blah: hjerk:
-Matt-
-Matt-
#4
Registered User
Join Date: Mar 2003
Location: Tucson AZ
Posts: 1,412
Likes: 0
Received 0 Likes
on
0 Posts
yah thats probably ur problem, using the wrong cable the crx cable u just gotta make sure u use the clip to hold it down. besides that ive never had issues with a crx speedo cable.
#5
Un-Registered User
Thread Starter
Join Date: Jun 2003
Location: Reno NV
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
with the cable that im running now, it seems to be working fine, and ive put 250 miles on it and when i had ti run wrong before they would break within 40 miles so ill see how long this one works hopefully a long time. Thanks for the Help.
-Matt-
-Matt-