wiper problem
#1
Registered User
Thread Starter
Join Date: Jul 2003
Location: morgantown, west virginia
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
wiper problem
my wipers go up, come back down, and then go back up about 1/4 of the way instead of staying down. has anyone else had this problem or know what the problem is? i'm going to mess with it some more. thanks.
#2
Senior Member
Join Date: Jun 2002
Location: San Diego, CA
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
Sounds like the motor is working a little too long. Check the relay. The wipers are controlled by a big mess of mechanical linkage that's hidden under that black plastic panel at the bottom of the windshield. It could also be a bad joint between one of those links. The linkages are in junk yards, as are the relays, most likely. No one ever takes stuff like that.
#3
Registered User
Thread Starter
Join Date: Jul 2003
Location: morgantown, west virginia
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
i've messed with the linkages...i had a bad joint that i replaced and it still has the same problem. i'm thinkin it might be where the linkage bolts to the motor (possibly in the wrong position when off).