If would help if this was on a 5th gen. Accord with Neuspeed Sports. Just wondering how many washers you used on each upper arm bolt? I heard there are 2 bolts on each side, and I should use 3 3 3/8" washers on each bolt. Just wondering if this sounds fine and what not. Thanks a lot.

 

i used 2 3/8 washers for each bolt.. even camber wear in the rear for me.. im dropped on h&r sports too, pretty much same as your neuspeeds.

 

Two for each bolt? Hmm... thanks for your suggestion. Anyone else? Thanks.

 

Yea same here. I also used some thread locking compund though to make sure of a tight fit.

 

Alright, guess I'll use 2 3/8 washers for each bolt. Thanks guys.

 

TTT, anybody else have any say on this? Thanks

 

tell us how it turns out im thinkin bout droppin my car...need cash tho....got HUGE fender gaps with my 17" and 215/40 quite embarassing...

 

i got 2 on each bolt as well. rule of thumb is, each washer is about .5'' positive camber.

my rear camber was -1.6 and with the two washers the tires have even tire wearing.

 

ingalls engineering rates their kitis with 3 washers as good for .75 degrees of correction.
within one degree of 0 is factory specs.

 

What about the fronts