Has anyone been able to fit an amp under either seat? (driver's or passenger's) I have a coupe and was wondering if this has ever been done before, it seems a little tight down there.

 

Mine fits under the passenger seat. It fit fine with both my old manual LX seat and my new power leather seat. It's not huge though, RF 250, just drives my single 10" JL.

 

would you happen to have it's dimensions handy?

and how exactly did you mount it? there's a "bump" on the floor that runs horizontally across the middle of the seat..

 

just mount it to the back of your rear seats

 

After looking closer at it, it's the 200s, but anyway...
It looks like this but smaller, this is the 400s:



I couldn't find dimensions for mine, but here are the dimensions for the 400s, mine looks the same but is shorter, I would guess the depth and height is the same.

Without Endcaps: Height=2.489", Depth=9.8125", Width=8.8125"
With Endcaps: Height=2.489", Depth=9.8125", Width=12.8125"

Here is mine in the car:


To get oriented...that black vent in the upper right is the passenger vent under the seat.

 

that's weird... the vents on my coupe are "inside".. that is, beside the center console of the car

 

So is mine, to the right of the picture is the front of the car. Straight up would be the center console.

 

how do you mount it on the back seats? I was able to do this with my 4th gen accord but with my 6th gen I have a little compartment that can open from the backseats to the trunk. under the passenger seat seems the best place for the amp.

 

coupes ahve the regular 60/40 split down... i sorta envy you though, you have a port for your sub right down the middle ;D

 

yeah but you have the coupe