Just bought a Honda, check it out.
08-25-2003 | 08:36 AM
#11
Thread Starter
Junior Member
Joined: Aug 2003
Posts: 16
Likes: 0
From: WA & ID
Originally posted by 94AccordSedanEX
Nice and clean find you got. Good luck with it, but let me get this striaght. You're putting a Jeep exhaust on it?
Nice and clean find you got. Good luck with it, but let me get this striaght. You're putting a Jeep exhaust on it?
08-25-2003 | 08:38 AM
#12
Thread Starter
Junior Member
Joined: Aug 2003
Posts: 16
Likes: 0
From: WA & ID
Originally posted by whoaitslen2
oh no3s! before you tell us whats going in it please blur out your plates! lots of theives roaming around forums like this.
but yes clean 4th gen indeed :thumbup:
oh no3s! before you tell us whats going in it please blur out your plates! lots of theives roaming around forums like this.
but yes clean 4th gen indeed :thumbup:
I thought about taking out my plates, but that takes effort
If a theif wants to come steal my broken factory tape deck, have at it. Where I live, the police give awards to home owners that shoot thieves in the act
08-25-2003 | 08:39 AM
#13
Thread Starter
Junior Member
Joined: Aug 2003
Posts: 16
Likes: 0
From: WA & ID
Originally posted by EliteAccord
Yes the EX you got is the top of the line 4th Gen Accord.
Yes the EX you got is the top of the line 4th Gen Accord.
Cool! After reading a little, I am under the impression they are a little hard to find? I actually found 3 that I had to choose from. This one had the most miles, but it was most definitly the cleanest and ran the best. Go figure.
08-25-2003 | 08:41 AM
#14
Thread Starter
Junior Member
Joined: Aug 2003
Posts: 16
Likes: 0
From: WA & ID
Originally posted by usc
um... quick question. so is it a 90-91 or a 92-93? the front end is that of a 90-91, and the trunk/tail is that of a 92-93.
i was looking for the automatic seat-belt with your interior pic, which would indicate it's 90-91.
in any case, you may want to find out if the car has been in an accident or not, or at least anything that could explain the different front/tail ends.
other than that, it's a clean 4th gen.
um... quick question. so is it a 90-91 or a 92-93? the front end is that of a 90-91, and the trunk/tail is that of a 92-93.
i was looking for the automatic seat-belt with your interior pic, which would indicate it's 90-91.
in any case, you may want to find out if the car has been in an accident or not, or at least anything that could explain the different front/tail ends.
other than that, it's a clean 4th gen.
Well, I am positive that it's never wrecked and I'm positive the seatbelts aren't automatic other than the automatic light that tells me to put it on. Maybe the single owner old lady before me got the mod bug and put a different rear end on it?
08-25-2003 | 06:36 PM
#18
Reset?
Joined: Jun 2003
Posts: 1,332
Likes: 0
From: nor cal
Originally posted by Klaüs
Thanks man.
Any of you guys know how to change the front, lower signal/marker lights into fog lights? Will they still function as signal lights?
Thanks man.
Any of you guys know how to change the front, lower signal/marker lights into fog lights? Will they still function as signal lights?
i think you're talking about clear lenses and corner lenses
they still function as blinker lights, but just the lenses are clear and look cleaner
08-25-2003 | 07:12 PM
#19
Thread Starter
Junior Member
Joined: Aug 2003
Posts: 16
Likes: 0
From: WA & ID
Originally posted by A_D
i think you're kinda confused on this concept
i think you're talking about clear lenses and corner lenses
they still function as blinker lights, but just the lenses are clear and look cleaner
i think you're kinda confused on this concept
i think you're talking about clear lenses and corner lenses
they still function as blinker lights, but just the lenses are clear and look cleaner
Yeah, I follow you there, I actually did clear corners on my Jeep (see pic below) But from what I've read, they can make the light down there turn into a fog light (actually project) as well as serve as a turn signal. I actually saw a dude back home that had done that. Either that or stuck a fog light down there and made it look 100% factory. My guess it involves some clear lenses, some sort of new bulb or light, and some wiring. I'll follow 94Accord's advice and check out the write up he's talkin' 'bout.
Thanks guys
08-25-2003 | 07:24 PM
#20
Thread Starter
Junior Member
Joined: Aug 2003
Posts: 16
Likes: 0
From: WA & ID
Originally posted by 94AccordSedanEX
Yes, they'll still function. Very easy mod to do also. I did it following cryogen's How-To. Search for cryogen97 (his user name here) and just go to his website and look around there at his how-to's.
Yes, they'll still function. Very easy mod to do also. I did it following cryogen's How-To. Search for cryogen97 (his user name here) and just go to his website and look around there at his how-to's.
Badda bing :thumbup: http://www.andrews.edu/~johnsonm/how...perlights.html