Replacing brake pads
#11
Originally posted by skabone69
so do AEM pads get really noisy?
so do AEM pads get really noisy?
brake quiet is what the stuff is called. you install it on the shims that go in back of the pads. this type of noise is caused by inproper installation and not from the pads.
also notice an asbestos type smell when i get on my brakes hard or when i'm in traffic and the brakes get really hot from going 0-30-0 every 3 seconds.
#12
I went stock and Im extremely happy I did. Even came with a little packet of the grease. Remove the old pads and shims and put grease in the same spots on the new set, then put them back on.
Havent heard a peep from my brakes (Ive replaced both the backs and fronts now with stock pads and they've been silent for the whole time).
If you get them online they arent much more than a set of Raybestos. From the dealer is a different story, but still worth it in my opinion.
-Chris
Havent heard a peep from my brakes (Ive replaced both the backs and fronts now with stock pads and they've been silent for the whole time).
If you get them online they arent much more than a set of Raybestos. From the dealer is a different story, but still worth it in my opinion.
-Chris
#13
I just got a set of everex; didn't squeek or anything; costed me $27
works pretty well...
I will throw away the car in about 3 years, so I don't want to put down any more investment into the car; I was surprised to find out that those brake pads are actually decent....
works pretty well...
I will throw away the car in about 3 years, so I don't want to put down any more investment into the car; I was surprised to find out that those brake pads are actually decent....
#14
Originally posted by chrisexv6
I went stock and Im extremely happy I did. Even came with a little packet of the grease. Remove the old pads and shims and put grease in the same spots on the new set, then put them back on.
Havent heard a peep from my brakes (Ive replaced both the backs and fronts now with stock pads and they've been silent for the whole time).
If you get them online they arent much more than a set of Raybestos. From the dealer is a different story, but still worth it in my opinion.
-Chris
I went stock and Im extremely happy I did. Even came with a little packet of the grease. Remove the old pads and shims and put grease in the same spots on the new set, then put them back on.
Havent heard a peep from my brakes (Ive replaced both the backs and fronts now with stock pads and they've been silent for the whole time).
If you get them online they arent much more than a set of Raybestos. From the dealer is a different story, but still worth it in my opinion.
-Chris
#15
do not get raybestos!!!! there good because there cheap, but they are the loudest pieces of crap on the planet. i got them for my supra and have regreted it ever since. always go with oem or better if u dont want them to make noise.
#16
Originally posted by AccordSleeper
my AEM pads seem to make noise now when they are cold. when they were new they were quiet. it's not bad though. remember really performance pads are noisy, so i'm guessing once the AEMs are broken in they perform better.
brake quiet is what the stuff is called. you install it on the shims that go in back of the pads. this type of noise is caused by inproper installation and not from the pads.
also notice an asbestos type smell when i get on my brakes hard or when i'm in traffic and the brakes get really hot from going 0-30-0 every 3 seconds.
my AEM pads seem to make noise now when they are cold. when they were new they were quiet. it's not bad though. remember really performance pads are noisy, so i'm guessing once the AEMs are broken in they perform better.
brake quiet is what the stuff is called. you install it on the shims that go in back of the pads. this type of noise is caused by inproper installation and not from the pads.
also notice an asbestos type smell when i get on my brakes hard or when i'm in traffic and the brakes get really hot from going 0-30-0 every 3 seconds.
#17
Originally posted by skabone69
AccordSleeper, did you put brake quiet on you shims? Guys, should I consider getting it?
AccordSleeper, did you put brake quiet on you shims? Guys, should I consider getting it?
#19
Originally posted by skabone69
where did you get that stuff?
where did you get that stuff?