I will post on this thread when it is available. It might take a month or 2, but I willl let you all know.

 

Hey, I'm selling an entire kit made up of 8 5mm blue led bulbs for $20 shipped. If you're interested, let me know by emailing me at MoMoney726@aol.com and I will send them out as soon as I receive payment. I can also add in additional LED bulbs for $1 for each additional bulb. 5mm or 3mm.

 

 

Hey, cryogen shows you how to do your led's for a 5th gen accord at
http://www.andrews.edu/~johnsonm/howto/blueLED.html
If this is all that you are looking to change, I can provide these LEDs for you guys as well. $3 an LED from radio shack for 8? Plus tax? Well that's about $25. So instead of me charging $20 shipped, I will go ahead an knock it down to $15 shipped for you guys. This includes 8 5mm LED bulbs and an additional $1 for each LED you want added. The only time you really need a resistor is for the 3mm LEDs. The ones that require the bulb holder. Anything else that is soldered to the circuit board doesn't need any resistor.

 

yeah, i've seen that, i just want to make the buttons and stuff light up blue, also. so as soon as its figured out how to do that and resistors and such i'll be looking to buy the whole package.

 

yeah, let us know when the 5th gen kit is available, I'll be waiting...

 

Are those the only buttons you want to replace? Those 8? Or is there more? Tell me what other buttons you are trying to replace and I will try to find out. For resistors, I can gve you a link to buy as many resistors as you need for a really cheap price. I just got about 100 5mm and 100 3mm blue LEDs that I'm trying to sell. If it's just those 8 buttons, you don't need resistors. From all that I have done, the only time you really need resistor is when you have the led's for the bulb holders, which are normally the 3mm led's, like the clock. I can also provide 24 guage bus wire if you need to exten it by using the 3mm led's. You can't really beat $15 shipped for led's. On ebay, they sell only partial kit for like $40 plus shipping. Or go to radio shack for $3 for one bulb. Mine is $15 for 8 led's and for each additional led of either 3mm OR 5mm will be $1 and shipping is for free.

 

i want to do the indicator lights above the buttons and also the light behind the actual buttons and clock etc. like for the 6th gens.

 

Well I can't specifically tell you what size bulbs are behind the buttons themselves but last time I checked on my 6th gen, I think they were 3mm bulbs, but don't quote me on that. the lights above I know for sure are 5mm and the clock is also 3mm, but for that you WILL need a resistor. I can tell you the size that you need for that if you go to the site that I have. You can use the surface mount or jst the other type of resistor, but it's recmmended to use the surface mount since it will be less of a hassle to reinstall. I haven't had any luck with finding surface mount resistors at radio shack, so you might want to check online or other electronics shop.

 

yeah, i need to find the time to take that stuff out and find exactly what i need. i was just hoping somebody else would do it and make a kit so i wouldn't have to h: