You need to remove the front bumper not as hard as it sounds. First remove the grill. Five screws and it pops out. If you're doing both sides, remove the battery and windshield washer tank. Remove the side marker lamps by unscrewing one screw for each lamp. Remove the turn directional lamps on the bottom of the bumper. Behind each lamp opening you will see two bolts that need to be removed. Directly above the directionals inside the engine compartment there is a threaded stud with a nut on each side, remove both nuts. After removing the four bolts and two nuts the bumper pull right off. Each headlight assembly has five screws holding it in, remove those and pull out the headlights. To install just reverse the process.