Notices

Adjusting Illuminas

Thread Tools
 
Old 03-25-2003 | 07:43 AM
  #1  
Accord2k1's Avatar
Accord2k1
Thread Starter
Member
 
Joined: Nov 2002
Posts: 40
Likes: 0
From: FL
Default Adjusting Illuminas

I just got Tokico Illumina's and H&R Sports put on my Accord about 3 weeks ago. Right, now I have the struts set at the "3" setting in the front and "5" in the back. The ride isnt bad, but I wanna go softer all around. The problem is i was told the back struts can only be adjusted by removing the back seat. I can get the rear bench up, but it's nothing but hard metal underneath. Any ideas on what i'm doing wrong or what i'm missing to get in there.
Old 03-25-2003 | 08:53 AM
  #2  
phat99accord's Avatar
phat99accord
BMW Tech
 
Joined: Oct 2002
Posts: 514
Likes: 0
From: Suffolk County, NY
Default

is it a coupe or sedan
the coupe the upper parts of the struts are sitting covered by the deck lid not the bench. not so sure about the sedan though
Old 03-25-2003 | 09:52 AM
  #3  
Accord2k1's Avatar
Accord2k1
Thread Starter
Member
 
Joined: Nov 2002
Posts: 40
Likes: 0
From: FL
Default

Originally posted by phat99accord
is it a coupe or sedan
the coupe the upper parts of the struts are sitting covered by the deck lid not the bench. not so sure about the sedan though
It's an LX Sedan. 4 cyl.
Old 03-25-2003 | 12:44 PM
  #4  
phat99accord's Avatar
phat99accord
BMW Tech
 
Joined: Oct 2002
Posts: 514
Likes: 0
From: Suffolk County, NY
Default

im not sure if your struts are behind the carpeting in the trunk like my sis's 97 4door(i know you have a 01 but just comparing the 4door) or like under the carpeting of the rear decklid like my 99 coupe




All times are GMT -8. The time now is 12:16 PM.