Notices

4 banger 03 accord ex RIMS

Thread Tools
 
Old 03-15-2003 | 03:15 PM
  #1  
titaniumGSR's Avatar
titaniumGSR
Thread Starter
Senior Member
 
Joined: Jul 2002
Posts: 176
Likes: 0
Default 4 banger 03 accord ex RIMS

just wondering how much u guys think i could sell em for w/ tires.. its got about 10K miles on the tires. rims in perfect condition =).. i want some new 18s .. just wonderin.. if i got 18s.. would it rub against the fenderwell when i made a hard turn? i dunno how big the wheel well is for the new accord
Old 03-15-2003 | 04:08 PM
  #2  
96JdmAccord's Avatar
96JdmAccord
Im So JDM
 
Joined: Dec 2002
Posts: 3,724
Likes: 0
From: Portland Oregon
Default

Its only really going to rub if you lower it too much..18's will be fine on the car, just might look a little goofy without it lowered..
Old 03-15-2003 | 04:16 PM
  #3  
v6master's Avatar
v6master
Rice Hater
 
Joined: Jul 2002
Posts: 292
Likes: 0
From: Columbus, Ohio
Default

you have to make sure it's the right offset, it's not gonna matter about how much you lower the car ( within a reasonable amount)........I wouldn't sell your OEM wheels though..........you might need them for bad weather, if you decide to sell the car, etc. It's a good idea to keep them around as backup. With the new 18's, just make sure the offset is correct for the car (ie- +45 and up, the higher the better) and you should have no issues with rubbing whatsoever.
Old 03-15-2003 | 04:19 PM
  #4  
jschmid's Avatar
jschmid
Senior Member
 
Joined: May 2002
Posts: 3,049
Likes: 0
From: OH
Default

Originally posted by v6master
you have to make sure it's the right offset, it's not gonna matter about how much you lower the car ( within a reasonable amount)........I wouldn't sell your OEM wheels though..........you might need them for bad weather, if you decide to sell the car, etc. It's a good idea to keep them around as backup. With the new 18's, just make sure the offset is correct for the car (ie- +45 and up, the higher the better) and you should have no issues with rubbing whatsoever.
:werd:
Old 03-15-2003 | 05:16 PM
  #5  
titaniumGSR's Avatar
titaniumGSR
Thread Starter
Senior Member
 
Joined: Jul 2002
Posts: 176
Likes: 0
Default

yea.. true.. =P.. but.. anybody know how much i might be able to sell em for? =P
Old 03-15-2003 | 05:19 PM
  #6  
98CoupeV6's Avatar
98CoupeV6
lots and lots of fail
 
Joined: Dec 1999
Posts: 23,004
Likes: 1
From: Deeeeeeeeeeeeeeetroit
Default

I saw a set on EBay with a day left going for $600...you could probably get 7 or 8.
Old 03-16-2003 | 12:09 AM
  #7  
titaniumGSR's Avatar
titaniumGSR
Thread Starter
Senior Member
 
Joined: Jul 2002
Posts: 176
Likes: 0
Default

Originally posted by 98CoupeV6
I saw a set on EBay with a day left going for $600...you could probably get 7 or 8.
ahh yea.. i just checked.. lotta v6 rims out there selling for at least 700.. 800 sounds rite.. cuz the ex 4 banger rims look a whole lot better than the v6 rims.. =P
Old 03-16-2003 | 08:03 AM
  #8  
REbornHONDAneer's Avatar
REbornHONDAneer
Honda Biased
 
Joined: Mar 2002
Posts: 1,076
Likes: 0
From: Kennesaw, GA
Default

aye....i'll trade my 18's for $200 from you. Mine are in good condtion....two bran new tires...two almost bald. These rims arent low quality either. I ran into a pothole the size of a football once. TOTALLY screwed the sidewall of my tire but the rim didnt even dent. I call that quality! Check the gallery to see my rims. Or click my sig.

This is all assuming that you have 4x114.3 lug patt.(not sure if 03's have that)

Dave
Old 03-16-2003 | 08:28 AM
  #9  
jschmid's Avatar
jschmid
Senior Member
 
Joined: May 2002
Posts: 3,049
Likes: 0
From: OH
Default

Originally posted by REbornHONDAneer

This is all assuming that you have 4x114.3 lug patt.(not sure if 03's have that)

Dave
7th gen's are all 5 lug.
Old 03-16-2003 | 08:31 AM
  #10  
REbornHONDAneer's Avatar
REbornHONDAneer
Honda Biased
 
Joined: Mar 2002
Posts: 1,076
Likes: 0
From: Kennesaw, GA
Default

Originally posted by jschmid
7th gen's are all 5 lug.
crap..well..i tried!



All times are GMT -8. The time now is 03:20 PM.