New digital camera= pics of my car finally! (link to my imagestation album)
03-09-2003 | 08:39 AM
#1
Thread Starter
Senior Member
Joined: Jun 2002
Posts: 671
Likes: 0
From: Raleigh, NC
New digital camera= pics of my car finally! (link to my imagestation album)
Well, i spent all that time uploading to imagestation and after testing it, i found out it won't let my link from outside. So here is the link to my album. If anyone wants to reupload and post any of the accord pics onto this thread, please do so. You will see that my car is pretty much all stock except for a few things. Im only 17 with no job, but this summer will bring in the cash hopefully, enjoy!
Note: I took some pics of my custom tweeter install so if anyone has any questions about that, just post em up.
http://www.imagestation.com/album/?id=4290591761
Note: I took some pics of my custom tweeter install so if anyone has any questions about that, just post em up.
http://www.imagestation.com/album/?id=4290591761
03-09-2003 | 09:21 AM
#4
Thread Starter
Senior Member
Joined: Jun 2002
Posts: 671
Likes: 0
From: Raleigh, NC
Originally posted by KAUAI KANE
:rofl: ditch the alteazzers
:rofl: ditch the alteazzers
nizmugen- Thanks for puttin up my pics!
03-09-2003 | 09:27 AM
#6
Senior Member
Joined: Jun 2002
Posts: 1,053
Likes: 0
From: San Diego, CA
Originally posted by smakdown
nizmugen- Thanks for puttin up my pics!
nizmugen- Thanks for puttin up my pics!
click on the full size pic and copy down the url:
http://www.imagestation.com/picture/...4.jpg.orig.jpg
then just copy that url without the .orig.jpg at the end and u can link from them
03-09-2003 | 01:24 PM
#9
Thread Starter
Senior Member
Joined: Jun 2002
Posts: 671
Likes: 0
From: Raleigh, NC
Actually, those are the stock grilles 
I took a pic of them because i don't know how many people would notice that they are raised up a little. Since there were 6.5 inch ones in their before, i had to custom make a bracket for my infinity 6x9s using mdf. But the tweets were sticking up too much, so i had to put some nylon spacers where the screw holes are to raise it up a tad. I thought it looked wierd, but if no one else can really notice, its all good then
As for plans. this summer will probably bring some neuspeed sports and agx shocks, some 17s, neuspeed strut tower bar, and maybe a stiffer sway bar underneath in the back.
System wise: An alpine mp3 unit probably by summer, maybe a sub or two.
As for the engine though, its really not worth doing anything minor (stupid slow auto) and i dont plan on getting an h22 so ill probably leave it stock until i sell it (after college). The only thing i might do (slight possibility) is get rid of my stock muffler for an rsx type-s, but thats a big maybe.
I took a pic of them because i don't know how many people would notice that they are raised up a little. Since there were 6.5 inch ones in their before, i had to custom make a bracket for my infinity 6x9s using mdf. But the tweets were sticking up too much, so i had to put some nylon spacers where the screw holes are to raise it up a tad. I thought it looked wierd, but if no one else can really notice, its all good then As for plans. this summer will probably bring some neuspeed sports and agx shocks, some 17s, neuspeed strut tower bar, and maybe a stiffer sway bar underneath in the back.
System wise: An alpine mp3 unit probably by summer, maybe a sub or two.
As for the engine though, its really not worth doing anything minor (stupid slow auto) and i dont plan on getting an h22 so ill probably leave it stock until i sell it (after college). The only thing i might do (slight possibility) is get rid of my stock muffler for an rsx type-s, but thats a big maybe.