Tools: Sockets, wrenches, philips screw driver, dremel with cutting bit, Haynes Manual, other things that i cant think of.

Step 1: Take bumper off



Step 2: Take bumper and lip to a nice place to work on with lighting and power outlets. I took mine into the basement.

Step 3: Cut off ALL tabs off the lip.



Step 4: Mount Lip on bumper by holding lip in place and using something to mark where to drill holes. While doing this, mark the edges so u can cut the excess length. Use a dremel or hax saw to cut it or anything else.



Here's a pic of the bending:


Step 5: After marking holes, take a drill with the proper size drill bit and drill the holes.



Step 6: Put lip back on the bumper and put the bolts, washers and nuts in place.




Step 7: Tighten all the bolts and make sure they're all in place.




Step 8: Put bumper back on. Be carefull not to drop the bumper. Finish product should look like this:



GOODLUCK!!!

 

sweeeet. imma make a copy for the DIY forum. thanks a lot! great post. :thumbup:

 

yeah, great post - pics and everything.

The end product =:thumbup:

 

thanks for the post man, i think i will buy myself a lip soon

Do you have any pic of the tool you used to cut off the edges?

 

so did you use new bolts and not the ones from the stick lip?

 

the lip off ebay came with bolts. and my car is an LX so i didnt have bolts.