need help taking off bumper
03-05-2003 | 05:21 PM
#31
lots and lots of fail
Joined: Dec 1999
Posts: 23,004
Likes: 1
From: Deeeeeeeeeeeeeeetroit
Originally posted by Nightshade
Mine is 5th gen but we replaced a 6th gen bumper on my buddies ride while he was gone (it was a joke on him) and it was pretty easy as well.
Mine is 5th gen but we replaced a 6th gen bumper on my buddies ride while he was gone (it was a joke on him) and it was pretty easy as well.
03-05-2003 | 05:33 PM
#32
un-Touch'd krew
Joined: May 2001
Posts: 51,774
Likes: 1
From: My own level of hell
Originally posted by captainsaveaho
ok, so why don't you help a man out, and tell your secret???
ok, so why don't you help a man out, and tell your secret???
Sorry its just how it is sometimes
__________________
"I'll keep my money, guns and freedom. You can keep the "Change."
"I'll keep my money, guns and freedom. You can keep the "Change."
03-05-2003 | 05:39 PM
#33
Thread Starter
lovez $avinG hoe$
Joined: Jan 2003
Posts: 335
Likes: 0
From: PHILAdelphia
Originally posted by Nightshade
Well I would except that I am such a highly visual person its tough for me to do. I could show you how all day long but telling you how is another matter.
Sorry its just how it is sometimes
Well I would except that I am such a highly visual person its tough for me to do. I could show you how all day long but telling you how is another matter.
Sorry its just how it is sometimes
i personally, think you're pulling my leg
03-05-2003 | 05:53 PM
#34
un-Touch'd krew
Joined: May 2001
Posts: 51,774
Likes: 1
From: My own level of hell
Originally posted by captainsaveaho
just explain to me where the bolts are on top, that all you gotta do.:naughty: :thumbup: :thumbup: i personally, think you're pulling my leg
just explain to me where the bolts are on top, that all you gotta do.:naughty: :thumbup: :thumbup:
i personally, think you're pulling my leg
Let me go pull one off real quick and I will tell you where they all are
[Capt.Obvious]Just pull on the bumper a little and find where its hanging up and folow the hangup to its source and I bet theres a bolt or a clip close by holding it on. [/Capt.Obvious]
__________________
"I'll keep my money, guns and freedom. You can keep the "Change."
"I'll keep my money, guns and freedom. You can keep the "Change."
03-06-2003 | 06:17 AM
#35
Senior Member
Joined: May 2002
Posts: 3,049
Likes: 0
From: OH
Originally posted by Nightshade
The diagram provided shows where they are:doh:
Let me go pull one off real quick and I will tell you where they all are
[Capt.Obvious]Just pull on the bumper a little and find where its hanging up and folow the hangup to its source and I bet theres a bolt or a clip close by holding it on. [/Capt.Obvious]
The diagram provided shows where they are:doh:
Let me go pull one off real quick and I will tell you where they all are
[Capt.Obvious]Just pull on the bumper a little and find where its hanging up and folow the hangup to its source and I bet theres a bolt or a clip close by holding it on. [/Capt.Obvious]
03-06-2003 | 01:00 PM
#36
Thread Starter
lovez $avinG hoe$
Joined: Jan 2003
Posts: 335
Likes: 0
From: PHILAdelphia
Originally posted by Nightshade
The diagram provided shows where they are:doh:
Let me go pull one off real quick and I will tell you where they all are
[Capt.Obvious]Just pull on the bumper a little and find where its hanging up and folow the hangup to its source and I bet theres a bolt or a clip close by holding it on. [/Capt.Obvious]
The diagram provided shows where they are:doh:
Let me go pull one off real quick and I will tell you where they all are
[Capt.Obvious]Just pull on the bumper a little and find where its hanging up and folow the hangup to its source and I bet theres a bolt or a clip close by holding it on. [/Capt.Obvious]
btw NIGHTSHADE which part of portland you from??? i used to stay there for like 6 months
on lombard ave with this laos chick:naughty:
03-06-2003 | 04:34 PM
#37
Junior Member
Joined: Nov 2002
Posts: 16
Likes: 0
From: toronto
Originally posted by captainsaveaho
OBVIOUSly, you don't know what you're talking about...........once again and the last time i'm saying this................THAT DIAGRAM IS FOR A COUPE, I NEED ONE FOR A SEDAN. once again, i looked at the top of my bumper, with the hood open, and there's no clips on the top(well, theres two little ones, but it's there to hold on the seal), BUT i see 2 metal bars(attached/welded from the top of the bumper) that are connected like to the side of the radiator. and it's impossible to get to the screws UNLESS the lights are out, which is the only reason why i want it OFF!!!!!!!!!!!!!!
OBVIOUSly, you don't know what you're talking about...........once again and the last time i'm saying this................THAT DIAGRAM IS FOR A COUPE, I NEED ONE FOR A SEDAN. once again, i looked at the top of my bumper, with the hood open, and there's no clips on the top(well, theres two little ones, but it's there to hold on the seal), BUT i see 2 metal bars(attached/welded from the top of the bumper) that are connected like to the side of the radiator. and it's impossible to get to the screws UNLESS the lights are out, which is the only reason why i want it OFF!!!!!!!!!!!!!!
03-06-2003 | 05:15 PM
#38
un-Touch'd krew
Joined: May 2001
Posts: 51,774
Likes: 1
From: My own level of hell
Originally posted by captainsaveaho
OBVIOUSly, you don't know what you're talking about...........once again and the last time i'm saying this................THAT DIAGRAM IS FOR A COUPE, I NEED ONE FOR A SEDAN. once again, i looked at the top of my bumper, with the hood open, and there's no clips on the top(well, theres two little ones, but it's there to hold on the seal), BUT i see 2 metal bars(attached/welded from the top of the bumper) that are connected like to the side of the radiator. and it's impossible to get to the screws UNLESS the lights are out, which is the only reason why i want it OFF!!!!!!!!!!!!!!
btw NIGHTSHADE which part of portland you from??? i used to stay there for like 6 months on lombard ave with this laos chick:naughty:
OBVIOUSly, you don't know what you're talking about...........once again and the last time i'm saying this................THAT DIAGRAM IS FOR A COUPE, I NEED ONE FOR A SEDAN. once again, i looked at the top of my bumper, with the hood open, and there's no clips on the top(well, theres two little ones, but it's there to hold on the seal), BUT i see 2 metal bars(attached/welded from the top of the bumper) that are connected like to the side of the radiator. and it's impossible to get to the screws UNLESS the lights are out, which is the only reason why i want it OFF!!!!!!!!!!!!!!
btw NIGHTSHADE which part of portland you from??? i used to stay there for like 6 months
on lombard ave with this laos chick:naughty:
As for the Capt. Obvious deal I meant that in the best way possible. If you just run along the loose parts and see where it is hanging up then look for a clip or a bolt that hasn't been loosend.
Its the way I always do things when pulling off body parts (and I do it all day long) and it seems to be the best way I have found, because even the Haynes manuals miss a bolt or two once in a while.
__________________
"I'll keep my money, guns and freedom. You can keep the "Change."
"I'll keep my money, guns and freedom. You can keep the "Change."
03-06-2003 | 07:09 PM
#40
Senior Member
Joined: Mar 2002
Posts: 437
Likes: 0
From: Kansas :p
Originally posted by Nightshade
As for the Capt. Obvious deal I meant that in the best way possible. If you just run along the loose parts and see where it is hanging up then look for a clip or a bolt that hasn't been loosend.
Its the way I always do things when pulling off body parts (and I do it all day long) and it seems to be the best way I have found, because even the Haynes manuals miss a bolt or two once in a while.
As for the Capt. Obvious deal I meant that in the best way possible. If you just run along the loose parts and see where it is hanging up then look for a clip or a bolt that hasn't been loosend.
Its the way I always do things when pulling off body parts (and I do it all day long) and it seems to be the best way I have found, because even the Haynes manuals miss a bolt or two once in a while.
Go to the dealership and ask for copies of the bumper diagram.