My new mod........door handles
#11
how did you do that, because the way the front door handle connects is different up front then in the back, i even think the mounts are different too, i was gonna do this mod with the passenger side handle
#12
Looks great my man, nice clean look. I like your car in general, although those tail lights don't do anything for me. Black is the best color for the Accord too.
I wonder if that works for 6th generation. I think the door handles are identical minus the locks.
I wonder if that works for 6th generation. I think the door handles are identical minus the locks.
#15
I already have an Optima battery and if something does happen I can always go through the trunk if it ever becomes necessary. By the way this mod was not at all a hassle. It was pretty damn easy. Here are some pics of the differences in the handles.
This is the back of my front handle. Notice the harness coming off of it......it wont be used since all it does is unlocks the other doors.
This is the rear handle I got..........notice the brass/gold piece that is on the latch arm. It will have to have the rivet drilled out and this piece removed so the latch rod can pop in like it did on the front handle.
Here is where it needs to be drilled out
Also notice that the screw mounting holes on the back of the two handles are slightly different but all I had to do was bend the mounts on the door a little to make it work.
This is the back of my front handle. Notice the harness coming off of it......it wont be used since all it does is unlocks the other doors.
This is the rear handle I got..........notice the brass/gold piece that is on the latch arm. It will have to have the rivet drilled out and this piece removed so the latch rod can pop in like it did on the front handle.
Here is where it needs to be drilled out
Also notice that the screw mounting holes on the back of the two handles are slightly different but all I had to do was bend the mounts on the door a little to make it work.
#18
I was in the process of shavine my door handle sall together and I had the remote entry and the battery went dead. lucky I hadnt done the pass. sid eyet and I could get in. After that I decided to put the handels back on and I have a keyless entry, the front pass side keyhold dont work anyways. I fawked it up when I removed the automatic seatbelt control switch and replaced it with the latch from a 92. the rod brok so I just havent got a new one yet.
That is a nice job man. Hope it all works out for you.
That is a nice job man. Hope it all works out for you.
#19
Originally posted by 99AccordCoupe
What if your car battery dies and the keyless entry doesn't work? I went on vacation for a week and my battery died. I couldn't open the car using keyless, had to use the key.
What if your car battery dies and the keyless entry doesn't work? I went on vacation for a week and my battery died. I couldn't open the car using keyless, had to use the key.