Notices

Timing Belt Change Parts

Thread Tools
 
Old 12-04-2007 | 08:45 AM
  #1  
ali7up's Avatar
ali7up
Thread Starter
Junior Member
 
Joined: Feb 2006
Posts: 34
Likes: 0
Default Timing Belt Change Parts

i am about to order the parts and just wanted to check if i was missing anything here are the parts i got so far:

- Timing Belt: 14400-PT0-004
- Timing Balancer Belt: 13405-PT0-0004
- Power Steering Belt: 56992-P0A-J02
- Alternator/Compressor Belt: 38920-P0A-J02
- Water Pump: 19200-P0A-003
- Front Balance Shaft Retainer Kit: 06923-P0A-306
- Valve Cover Gasket Kit: 12030-PT0-000
- Timing Belt Adjuster (Tensioner): 14510-PT0-004
- Timing Balancer Belt Adjuster (Tensioner): 13404-PT0-004
- Timing Belt Adjuster Spring: 13407-P0A-000
- Timing Balancer Belt Adjuster Spring: 14516-P0A-000
- Hondabond High-Temp Silicone Gasket Sealant: 08718-0001 (Can't Find this)

is there anything else i need for the timing bet change thanks

i have a 1995 honda accord lx
Old 12-05-2007 | 01:15 PM
  #2  
idol4232003's Avatar
idol4232003
Registered User
 
Joined: Jul 2004
Posts: 119
Likes: 0
Default

i think u might as well change the cam and crank oil seals also...
Old 12-05-2007 | 04:28 PM
  #3  
nspec_Cd5's Avatar
nspec_Cd5
Senior Member
 
Joined: Nov 2006
Posts: 915
Likes: 0
Default

Originally Posted by idol4232003
i think u might as well change the cam and crank oil seals also...
1000000% agree w/ that.
I leanrned taht the hard way. i tried to be cheap and a week later those fuckin seals went out.
Old 12-06-2007 | 06:18 AM
  #4  
ali7up's Avatar
ali7up
Thread Starter
Junior Member
 
Joined: Feb 2006
Posts: 34
Likes: 0
Default

yea after reading some more i added these parts also

cam seal: 91213-PT0-003
balancer seal and holder: 91233-PT0-003 (Seal)
oil pump drive seal: 15116-PT0-306
crank seal: 91212-P0A-004
Old 12-06-2007 | 07:04 AM
  #5  
v6_accord_jerz's Avatar
v6_accord_jerz
Stupid Power Ball
 
Joined: Jun 2006
Posts: 11,619
Likes: 0
From: Dirty Jersey
Default

Might as well get an A/C belt also.
Old 12-06-2007 | 07:24 AM
  #6  
ali7up's Avatar
ali7up
Thread Starter
Junior Member
 
Joined: Feb 2006
Posts: 34
Likes: 0
Default

Originally Posted by v6_accord_jerz
Might as well get an A/C belt also.
got it

- Alternator/Compressor Belt: 38920-P0A-J02
Old 12-06-2007 | 02:45 PM
  #7  
idol4232003's Avatar
idol4232003
Registered User
 
Joined: Jul 2004
Posts: 119
Likes: 0
Default

not sure if it's already included in ur list, but i believe one of the seals may not stay on tight once it's been replaced, so honda recommends also buying/installing a little contraption to do that. the dealer should know what im talking about.
Old 12-06-2007 | 11:43 PM
  #8  
nspec_Cd5's Avatar
nspec_Cd5
Senior Member
 
Joined: Nov 2006
Posts: 915
Likes: 0
Default

they make a little bracket to go with that. the bracket came after the these cars were already produced. some of those seals poped out on thier own.

The bracket is super cheap at the dealer, like 5 bucks. make sure u get that too




All times are GMT -8. The time now is 01:35 PM.