95 Civic coupe . I wanna change the nose to a 99-01 integra help!!!
08-18-2003 | 07:54 PM
#22
Administrator ☂
Joined: Jul 2002
Posts: 56,733
Likes: 3
From: NY
Originally posted by nightshocker
The black hatch is very sweet...
PS, clean E36!
__________________
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX - SOLD
EG Ferio - SOLD
FA Ferio - Returned
www.NelsonLee.net
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX - SOLD
EG Ferio - SOLD
FA Ferio - Returned
www.NelsonLee.net
08-19-2003 | 09:31 AM
#26
Registered Rota Dealer
Joined: May 2002
Posts: 2,805
Likes: 0
From: Bay Area, California
Fine fine, I'll give the how to...
You will need:
Hood, bumper, fenders, headlights, blinkers, and radiator support all from an integra.
1) Take the bumper, fenders, hood, headlights, and corner lights of your civic off. Keep the fenders on the side, you will need to use them later.
2) Drill out the welds on the civic's radiator support. The radiator support should come off now.
3) Now you need to weld on the integra's radiator support. Make sure you line it up perfectly - this is the difference between a nice job, and a one of those ugly misaligned jobs.
4) Cut the civic and integra fenders in half (somebody can provide a picture of where to cut). You will need to weld the rear of the civic fender to the front of the integra fender. Use bondo and sanding to smooth out any imperfections.
5) Now everything should just bolt into the civic chasis. There is some minor rewiring for the headlights/corner lights that you need to take care of (pretty self explainitory if you know how wires work
) Go get it painted and you're done with your Intevic.
You will need:
Hood, bumper, fenders, headlights, blinkers, and radiator support all from an integra.
1) Take the bumper, fenders, hood, headlights, and corner lights of your civic off. Keep the fenders on the side, you will need to use them later.
2) Drill out the welds on the civic's radiator support. The radiator support should come off now.
3) Now you need to weld on the integra's radiator support. Make sure you line it up perfectly - this is the difference between a nice job, and a one of those ugly misaligned jobs.
4) Cut the civic and integra fenders in half (somebody can provide a picture of where to cut). You will need to weld the rear of the civic fender to the front of the integra fender. Use bondo and sanding to smooth out any imperfections.
5) Now everything should just bolt into the civic chasis. There is some minor rewiring for the headlights/corner lights that you need to take care of (pretty self explainitory if you know how wires work
) Go get it painted and you're done with your Intevic.
