EG6 rear lip <> EG9 rear lip ??
#1
Still here... sorta...
Thread Starter
EG6 rear lip <> EG9 rear lip ??
So ya... I ordered an ABS CTR rear lip from a dude on ebay. The lip was on his coupe and I've asked the question time and time again to see whether the rear bumpers on a coupe and a sedan are the same.
Well, I got the lip last night and tried mounting it... there are gaps between the lip and the bumper near where it mounts on the corners. Also, it totally won't wrap all the way around the bottom of the bumper so I can't even get it to mount completely.
My front lip was snug, but doable... this one is like an inch too short... could it be that the coupe and sedan bumpers are different? How can they advertise that the lips will fit 2/4 drs pretty much everywhere?
I'm confused. :sad:
Well, I got the lip last night and tried mounting it... there are gaps between the lip and the bumper near where it mounts on the corners. Also, it totally won't wrap all the way around the bottom of the bumper so I can't even get it to mount completely.
My front lip was snug, but doable... this one is like an inch too short... could it be that the coupe and sedan bumpers are different? How can they advertise that the lips will fit 2/4 drs pretty much everywhere?
I'm confused. :sad:
#2
Sedan and Coupe Rears ARE the same.
The part number for the coupe rear is 107788
The part number for the sedan rear is 107788
The part number for the hatchback rear is 106190
The Type R lip's aren't made perfect, that is why the fitment is off... You need to play around with it.
The part number for the coupe rear is 107788
The part number for the sedan rear is 107788
The part number for the hatchback rear is 106190
The Type R lip's aren't made perfect, that is why the fitment is off... You need to play around with it.
__________________
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX - SOLD
EG Ferio - SOLD
FA Ferio - Returned
www.NelsonLee.net
9Y0 Cayenne GTS
E46 ///M3
YD4 MDX - SOLD
EG Ferio - SOLD
FA Ferio - Returned
www.NelsonLee.net
#3
Still here... sorta...
Thread Starter
it took some serious pulling and streatching, but I got it to fit... thought I was going to break it like 3 times.. :nervous:
Thanks for the ONE reply.
Thanks for the ONE reply.
#7
Snap, Crackle, Pop....
Join Date: May 2003
Location: S.D.
Posts: 411
Likes: 0
Received 0 Likes
on
0 Posts
Yup the bumpers are the same......
Some guy bought a wings west rear lip from me and complained about fitment and left negative feedback:madfawk:
Even though they are the Same Frickin Bumper......
Some people just don't have a clue
But I'm glad you figured it out without much trouble...
Lates
Some guy bought a wings west rear lip from me and complained about fitment and left negative feedback:madfawk:
Even though they are the Same Frickin Bumper......
Some people just don't have a clue
But I'm glad you figured it out without much trouble...
Lates
#8
Still here... sorta...
Thread Starter
I still need to post pics.. but I have to have my muffler hangers bent. The lip rubs on my N1 so I took it off. I don't want it melting. :nervous:
Getting it fixed tomorrow morning. :thumbup:
I'll post pics then.
Getting it fixed tomorrow morning. :thumbup:
I'll post pics then.
#9
Josh, careful with the ABS rear lip, my buddy melted his with his exhasut so if the muffler is close, watch out.
Also careful with the front one, I had an abs lip and in the snow in the winter it fought a curb and lost.
Also careful with the front one, I had an abs lip and in the snow in the winter it fought a curb and lost.