wondering if anybody out there in civic land can help me with a question. I have a 92 civic hatch cx, what i'm wondering if a rear sway bar off a integra can be used on my car i know that you can swap the rear ends and struts, but what about the sway bars front or rear. thanx for any help.

 

i think you need the lca's and/or endlinks. but i'm not sure.

 

ica's ???

 

lca= lower control arms

 

gotcha thanxs for the advise i'll do some more checkin. peace

 

I heard that you can do without the teggy LCA's if you get the endlinks and drill your existing civic LCA's.

Anybody have any info on this?

 

you may also need a few bits and peices from the acura dealership. I don't have the parts numbers or anything, but basically the backets and whatnot from a GSR, and.... 9 mm bolts I think....? I used to have more info on it, lemme search more tomarrow and I'll get back to you.

 

much easier just to get the teg LCA's. Only about $50 if you look around.

if you drill, everything will be off by just a bit, and that could seriously mess some thigns up.

 

thanx for the info guys

 

yeah, i've heard that too, but have also had issues with drilling into my car at all. i'd rather just get the teg lca's that were made for it.