i jus got a intake for my 00 civic ex..

okay.. first the intake has two holes but when i removed the stock i had to take out 3 plugs... so which one do i put into the intake im stuck.. if you can help me.. i would appreciate it


thanks!

 

are you sure the inake you have is for the right year vehicle for one?
sounds like you may have a different year

 

sounds like a 5th gen intake

 

You probably have a 96-98 Civic intake. 96-98 Civics had 2 "holes" in the intake pipe. One for IAT and one for the crankcase breather. 99-00 Civics have the same two, plus an additional sensor. You can always just drill a hole and use a rubber grommet.

 

you dont have to use the hose that goes to the valve cover

just plug in the O2 sensor and the other hose on ur intake

and put a breather on the valve cover

 

There's no O2 sensor in the intake arm.

 

yeah, drilling sounds like something i could do...

thanks alot guys

 

:chuckles:

 

I have a '00 EX and came upon your same problem when I got an intake.

1) Air temperature sensor (correct me if I'm wrong)
2) Head breather (correct me if I'm wrong)
3) Another breather tube that originates from somewhere in the block

I couldn't just leave that 3rd hose dangling off in space b/c I didn't know what it's purpose was (still don't). So I bought a small head breather, connected that to the head, and used the nipple on the intake for the unidentified hose.

You could do the same thing, for less than $20, or you can drill and attach another nipple on your intake, amount unknown, and just attach all 3 things like they would go on your stock intake.

 

Yeah , thats wut i think im gonna do GCEX