99 d16y8 into 97 hatch - which wiring setup to use??? PLZ HELP
04-02-2008 | 10:43 AM
#1
Thread Starter
the unibomber
Joined: May 2006
Posts: 46
Likes: 0
From: SoCal
99 d16y8 into 97 hatch - which wiring setup to use??? PLZ HELP
As the title states... Here's what I have:
97 ek hatch (obd2a car)
00 ex motor (obd2b)
00 ex motor harness (obd2b)
00 ex ecu (obd2b, think its a p2p)
my thoughts:
i could just get a 96-98 ex harness and ecu re-wire or use obd2a dizzy, also perform the ckf mod??
Not sure if this will work, but if somebody could just tell me the fastest and easiest way to get this car on the road, it would be appreciated.
97 ek hatch (obd2a car)
00 ex motor (obd2b)
00 ex motor harness (obd2b)
00 ex ecu (obd2b, think its a p2p)
my thoughts:
i could just get a 96-98 ex harness and ecu re-wire or use obd2a dizzy, also perform the ckf mod??
Not sure if this will work, but if somebody could just tell me the fastest and easiest way to get this car on the road, it would be appreciated.
04-02-2008 | 02:41 PM
#2
Joined: Jul 2003
Posts: 28,282
Likes: 0
From: michigan
As the title states... Here's what I have:
97 ek hatch (obd2a car)
00 ex motor (obd2b)
00 ex motor harness (obd2b)
00 ex ecu (obd2b, think its a p2p)
my thoughts:
i could just get a 96-98 ex harness and ecu re-wire or use obd2a dizzy, also perform the ckf mod??
Not sure if this will work, but if somebody could just tell me the fastest and easiest way to get this car on the road, it would be appreciated.
97 ek hatch (obd2a car)
00 ex motor (obd2b)
00 ex motor harness (obd2b)
00 ex ecu (obd2b, think its a p2p)
my thoughts:
i could just get a 96-98 ex harness and ecu re-wire or use obd2a dizzy, also perform the ckf mod??
Not sure if this will work, but if somebody could just tell me the fastest and easiest way to get this car on the road, it would be appreciated.
just use your 97 engine harness, get a obd2a dizzy and wire in for VTEC. Use an obd2a ecu...done. Or use your 97 harness, keep the obd2b dizzy and ecu and just do an obd2a to obd2b jumper harness.