dont seem to get much info on this swap take it it isnt all that commen

 

u have the y8 already? ihave one if u are interested in buying it

 

alrigh you are gonna need the rear transmission bracket from a 92-95 tranny if the y8 already came with the tranny, you are gonna need the wiring harness from an ex, or si of your obd preferably a p28 ecu from an obd1 ex or si manual and it should work fine although the y8 has a plug for a knock sensor you will not have to use it since obd 1 engines didnt require use of one, also the y8 has a wire in front of the timing belt for the crank angle sensor i believe but you can just let it be and you'll be fine good luck

 

ill buy the loom for this engine if its avalible think i can use the y8 is this right there both d-series sohc vtec

 

Yeah, because here in the States the smallest we ever got in an EG was 1.5l. The 1.3l series engines were discontinued in '87.

It should be pretty similar to swapping a Y8 into a US market CX.