Notices

Low voltage to TPS, HELP!

Thread Tools
 
Old 05-18-2004 | 09:39 AM
  #1  
imlachg1's Avatar
imlachg1
Thread Starter
Senior Member
 
Joined: Apr 2003
Posts: 176
Likes: 0
From: Indiana
Default Low voltage to TPS, HELP!

What would happen if when I tapped my TPS for N20, it got shorted out. Would it ruin my ecu? Im not getting a good voltage reading from my TPS, i'm only getting .02 even when I adjust it. What would be the problem? It worked fine for a year, then i tapped my TPS wire for my zex kit, and now my tps won't get good voltage? What would I have fried to cause this? Please help? Anyone in the PA area that is a wiring genious on hondas? I need some help. Please help a brother ht member out. THanks.
Old 05-18-2004 | 09:43 AM
  #2  
Civic2Scooby's Avatar
Civic2Scooby
 
Joined: Jul 2003
Posts: 28,282
Likes: 0
From: michigan
Default

Originally Posted by imlachg1
What would happen if when I tapped my TPS for N20, it got shorted out. Would it ruin my ecu? Im not getting a good voltage reading from my TPS, i'm only getting .02 even when I adjust it. What would be the problem? It worked fine for a year, then i tapped my TPS wire for my zex kit, and now my tps won't get good voltage? What would I have fried to cause this? Please help? Anyone in the PA area that is a wiring genious on hondas? I need some help. Please help a brother ht member out. THanks.
did you tap the wire correctly, if not, you could be getting a shitty electrical flow, or you could have zapped your TPS
Old 05-18-2004 | 09:46 AM
  #3  
Section8Blammo's Avatar
Section8Blammo
Crazy Canoodler
 
Joined: Mar 2003
Posts: 493
Likes: 0
From: Youngstown, OH
Default

Did you try removing the spliced-in wire for the n2o to see if the problem was the splice? Also, check your connection isn't loose; A short in the wire would create the same conditions. I think your ECU is fine. Maybe the wrong wire to the TPS is spliced?
Old 05-18-2004 | 09:47 AM
  #4  
imlachg1's Avatar
imlachg1
Thread Starter
Senior Member
 
Joined: Apr 2003
Posts: 176
Likes: 0
From: Indiana
Default

To be honest, i did a shitty job tapping it, i just used of of those t's made out of plastic. I took out the zex kit, and am still having the problem. I odered a new tps, and it is still messed up. Any idea? What would be giving it a bad voltage?
Old 05-18-2004 | 09:47 AM
  #5  
Section8Blammo's Avatar
Section8Blammo
Crazy Canoodler
 
Joined: Mar 2003
Posts: 493
Likes: 0
From: Youngstown, OH
Default

Originally Posted by b16aEGcivic
did you tap the wire correctly, if not, you could be getting a shitty electrical flow, or you could have zapped your TPS
You beat me.
Old 05-18-2004 | 09:50 AM
  #6  
imlachg1's Avatar
imlachg1
Thread Starter
Senior Member
 
Joined: Apr 2003
Posts: 176
Likes: 0
From: Indiana
Default

My buddy has helping me, and he on accident tapped it into my map sensor. We did a test run to see if the kit worked, without turning the car on, and after about a min I found out he tapped it into the map sensor. I took it off and put it on the tps and everything was fine. I drove it for a week or so and it was fine, i never shot any juice threw it, but. . . I need help.
Old 05-18-2004 | 09:50 AM
  #7  
Section8Blammo's Avatar
Section8Blammo
Crazy Canoodler
 
Joined: Mar 2003
Posts: 493
Likes: 0
From: Youngstown, OH
Default

Check the wire you spliced; those quick-splice things could have cut the thinly-gauged TPS wire. May be shorting itself out.
Old 05-18-2004 | 09:51 AM
  #8  
imlachg1's Avatar
imlachg1
Thread Starter
Senior Member
 
Joined: Apr 2003
Posts: 176
Likes: 0
From: Indiana
Default

its still in tact. I checked that. I even tested it at the ecu, and it was still terrible. What would cause this to be terrible voltage?
Old 05-18-2004 | 09:53 AM
  #9  
imlachg1's Avatar
imlachg1
Thread Starter
Senior Member
 
Joined: Apr 2003
Posts: 176
Likes: 0
From: Indiana
Default

just to reitterate(sp), i took the zex kit off, so the wire is no longer tapped.
Old 05-18-2004 | 10:21 AM
  #10  
Section8Blammo's Avatar
Section8Blammo
Crazy Canoodler
 
Joined: Mar 2003
Posts: 493
Likes: 0
From: Youngstown, OH
Default

May be that you need to adjust the TPS that you replaced. This and this may be of some help. There's lots of good info on the site; just search "TPS problem" or something to that effect.


Quick Reply: Low voltage to TPS, HELP!



All times are GMT -8. The time now is 04:33 AM.