In short, no.

In long, you will have to drill two holes in your subframe if they are not already there.

I don't know much about this model, hopefully someone has some more knowledge on this. You may want to try a search. I recall this being discussed a while ago.

 

why do you have to drill a hole for stock

 

I could be wrong, but I don't think the cx came with a rear swaybar option. Since it was not an option, the holes may not be there. I'm not 100% sure though.

 

Good source for bolts.

www.mcmaster.com

 

yeah, some cars have the lower hole, some dont. If not, just drill a 3/8" or 5/16" hole... not a big deal.

Take a quick look under the car and see if its there. It should look like the pic of the subframe I posted in the other swaybar thread.

:edit:This site is a how-to on the ITR bar, but it should be helpful... the only step you don't need to worry about is #7 http://geocities.com/bretq/swaybar_install.html