ok...this weekend I am doing a set of KYB AGXs on eibach pro-kits including ES bushings...I didnt know if anybody on here would be interested in a DIY on the suspension install including the bushing steps, etc. If anybody wants me to do it, I will take a bunch of pics with the digi and put some words to it.

 

Most definitely man! I've been looking around forever for a good DIY suspension install and haven't been able to find one. I'm getting new springs this summer and I am going to attempt to install them myself with a friend. This would be so nice to have!

 

Definitely interested! I'll be running the same setup, Prokit and KYB AGX's this summer.

 

Yep even the smallest DIY will help people out. Cause people are always searching the smallest shit out there and whats small to you is always big to someone else. Good shit man. Hope everything works out good.

 

I don't think you can have too many DIY's. Therefore, do it. :thumbup:

 

please please please do a write up

 

I've already done it about fifty times, but it never hurts to do a DIY for posterity h:

BTW, I just did my front LCA bushings last night... considering the PITA the other ones were, it was refreshingly easy.

 

I've seen enough spring install DIY's to last a lifetime

bushing installs, however.....

 

heres your bushing install...

1)Remove suspension component.
2)Bash, grunt, bleed, curse, burn, sweat, grind until bushings are removed
3)put in the new bushings w/ as much force as necessary
4)reassemble on car, check into mental ward.

 

i talked enough about my suspension bushing install for it to be labeled as a DIY