I just made this in coreldraw:



Notes:
*this is not intended to be a guide to installing side markers, as they have been done before. This is only to help people visualize wire connections.
*this works for 92-95 civics (that I know of), maybe other models too...
*it does not matter which wire you connect to each male connector on the sidemarker itself, as long as you tap into the two appropriate wires for that side of the car.
*this will correctly wire it up so that the side marker ONLY illuminates when the turn signal is activated. Meaning it will be off when you just have your parking lights on.
*most guides recommend 22 awg wire, but I used 18 awg and it worked just fine.

Hope this helps somebody

Here is a good walkthrough for the install: Installing side marker lights

 

Hey guys,
Do you think this deserves a sticky?

 

hmmm...maybe there should be a general wiring sticky......and we can throw all these diagram type things for the EG in it?

 

I never knew wiring side markers could be so difficult :dunno:

 

http://students.washington.edu/krist.../side/side.htm

This should be in that. It still wiring up sidemarkers but is based on the more popular version of the JDM market.

 

Nice link .