Looky Looky! (only 3 Pics, 56k welcome)
01-02-2004, 05:51 PM
#1
Registered User
Thread Starter
Join Date: May 2003
Location: Chino, CA
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
Looky Looky! (only 3 Pics, 56k welcome)
Okay, so I'm gonna be un-lazy tomorrow and install the following:
:thumbup:
very impressed with these, yea they're not spoon but I like em
then i'll install these....
ohhhhhhh yea !!!!
okay.. now here comes the hard part... I want to install these but I have a question
okay... shouldnt it be 450 in the front and 350 in the rear?!?!?
and if it should, can i just switch the springs or do i need to take them back?
:thumbup:
very impressed with these, yea they're not spoon but I like em
then i'll install these....
ohhhhhhh yea !!!!
okay.. now here comes the hard part... I want to install these but I have a question
okay... shouldnt it be 450 in the front and 350 in the rear?!?!?
and if it should, can i just switch the springs or do i need to take them back?
Nice stuff. 450-- front 350--rear because the weight of the engine the highest spring rate always goes up front.
01-02-2004, 06:47 PM
#5
Hybrid Forum Moderator
Join Date: Mar 2000
Location: Southwestern PA
Posts: 2,363
Likes: 0
Received 0 Likes
on
0 Posts
I have those shocks, remember that the top adjuster stuff goes in last, you need it removed to put a hex wrench in it to tighen the top hat (I had to pull mine apart). Have fun putting it on and here's hoping your rear LCA bolts aren't seized.
__________________
Andy - Reinstated Hybrid Forum Moderator
'06 Subaru Legacy Spec B - Stock, for now
'98 Civic EX - CTR headlights and grill, Kosei K1's, for sale
'90 240SX - SR20DET that will never get installed, project car.
Andy - Reinstated Hybrid Forum Moderator
'06 Subaru Legacy Spec B - Stock, for now
'98 Civic EX - CTR headlights and grill, Kosei K1's, for sale
'90 240SX - SR20DET that will never get installed, project car.
01-02-2004, 10:31 PM
#8
Join Date: Jul 2003
Location: michigan
Posts: 28,282
Likes: 0
Received 0 Likes
on
0 Posts
I would actually recomend gettin different lca's and put some energy suspension bushings in and do it all as one peice (lca, shock, spring) assembly....I broke the head off the bolt on both my rear lca's then I was stuck tryin to deal with that...and it sucks ass.
01-02-2004, 11:35 PM
#9
Registered User
Thread Starter
Join Date: May 2003
Location: Chino, CA
Posts: 633
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by b16aEGcivic
I would actually recomend gettin different lca's and put some energy suspension bushings in and do it all as one peice (lca, shock, spring) assembly....I broke the head off the bolt on both my rear lca's then I was stuck tryin to deal with that...and it sucks ass.
I would actually recomend gettin different lca's and put some energy suspension bushings in and do it all as one peice (lca, shock, spring) assembly....I broke the head off the bolt on both my rear lca's then I was stuck tryin to deal with that...and it sucks ass.
