removing REAR VIEW...?
07-26-2002 | 07:01 AM
#1
Thread Starter
Senior Member
Joined: Apr 2001
Posts: 7,644
Likes: 0
removing REAR VIEW...?
I'm going to be installing a banner of tint on the windsheild but I'd like it to be about 5in down so I need to remove the rear view mirror. Is there a "better way" to do it?
07-28-2002 | 02:55 PM
#3
hoooorraayy Beer
Joined: Jun 2002
Posts: 97
Likes: 0
From: MD
if you can find a way to do it without taking off your rearview then i would try doing it that way. in my experience with rearview mirrors once they come off they never stick as well after that.(wouldnt want your mirror to fall off everytime vtec hits
) but try spraying alcohol or some kind of adheasive remover. i think that should losen it up. then use a razor blade.
) but try spraying alcohol or some kind of adheasive remover. i think that should losen it up. then use a razor blade.
07-29-2002 | 02:40 AM
#6
Honorary Moderator Alumni
Joined: Sep 1999
Posts: 8,735
Likes: 0
From: Someplace with cones=AUTO
I agree if the rear view is glue to your windshield just cut the tint to fit around the base and the arm. Don't remove the mirror or it will not stick as well later.
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
07-29-2002 | 05:26 AM
#8
Thread Starter
Senior Member
Joined: Apr 2001
Posts: 7,644
Likes: 0
Originally posted by CivicSiRacer
I agree if the rear view is glue to your windshield just cut the tint to fit around the base and the arm. Don't remove the mirror or it will not stick as well later.
I agree if the rear view is glue to your windshield just cut the tint to fit around the base and the arm. Don't remove the mirror or it will not stick as well later.
Anyone know if there's tint that can be applied on the exterior?
....seriously...I may just get a Black Vinal banner or something
h:
08-06-2002 | 08:25 PM
#9
O.G. SON!
Joined: Jun 2002
Posts: 3,233
Likes: 0
From: PittsburgH
no
Originally posted by H-A Stud
damn...so I can't just go seemless?
Anyone know if there's tint that can be applied on the exterior?....seriously...
I may just get a Black Vinal banner or somethingh:
damn...so I can't just go seemless?
Anyone know if there's tint that can be applied on the exterior?
....seriously...I may just get a Black Vinal banner or something
h:
NOT VINAL!!! :down:
