anybody know where to get TSX Engine?
11-04-2003 | 04:35 PM
#32
Thread Starter
Registered User
Joined: May 2003
Posts: 55
Likes: 0
From: Cali~Bay Area~Une
all ****in jealous. damn i just asked if anybody had a damn engine. so this is what HAN's all about. talkin shit and hatin cuz we have different ideas. They aren't even conflicting ideas. well you know what then **** HAN! FUUUUUCCCCCKKKK HAN!!!!!!
11-04-2003 | 04:38 PM
#33
Dancing Banana Driver
Joined: Mar 2002
Posts: 2,022
Likes: 0
From: Reno, NV
No its not about talking shit, its about helping people understand ideas, power, money and how to acheve better goals in life. When i frist came here i wanted to drop a V6 into my car. after a day, i learned oh, that wont work very well, ok so i bought a B20.
no one said you couldnt do it, or cant, Just why? And your answer was i have money. You seem to be the one pushing topics about answers you cant back. Dont blow steam up are asses man, lay off the crack.
Just try to understand we are trying to help you understand the aspect of the car, not the engine. You didnt just ask bout the engine, cuz you bosted about droping it into your civic. If you didnt do that, no one woulda said shiiit.
no one said you couldnt do it, or cant, Just why? And your answer was i have money. You seem to be the one pushing topics about answers you cant back. Dont blow steam up are asses man, lay off the crack.
Just try to understand we are trying to help you understand the aspect of the car, not the engine. You didnt just ask bout the engine, cuz you bosted about droping it into your civic. If you didnt do that, no one woulda said shiiit.
11-04-2003 | 04:40 PM
#35
Thread Starter
Registered User
Joined: May 2003
Posts: 55
Likes: 0
From: Cali~Bay Area~Une
FUUCCK IT I'll prolly get banned anyways so FUUUCCCK SMURF and his DUMBASS. This is why I don't go on this fuccckin forum. I ask for help and people just talk shit.
However good shiiiit to Dra6on45 and GiSRNigz
However good shiiiit to Dra6on45 and GiSRNigz
11-04-2003 | 04:42 PM
#36
Thread Starter
Registered User
Joined: May 2003
Posts: 55
Likes: 0
From: Cali~Bay Area~Une
Oh yeah FUUUCKKK str8edgexx too. Jealous Biatch. Don't cry cuz you don't have money. and remember Smurf you were the one who came in with a bad tone in the first place. what kind of faggggot ass name is that anyways? Smurf??? Faaaaaag
11-04-2003 | 04:44 PM
#37
Thread Starter
Registered User
Joined: May 2003
Posts: 55
Likes: 0
From: Cali~Bay Area~Une
Originally posted by Smurf
No its not about talking shit, its about helping people understand ideas, power, money and how to acheve better goals in life. When i frist came here i wanted to drop a V6 into my car. after a day, i learned oh, that wont work very well, ok so i bought a B20.
no one said you couldnt do it, or cant, Just why? And your answer was i have money. You seem to be the one pushing topics about answers you cant back. Dont blow steam up are asses man, lay off the crack.
Just try to understand we are trying to help you understand the aspect of the car, not the engine. You didnt just ask bout the engine, cuz you bosted about droping it into your civic. If you didnt do that, no one woulda said shiiit.
No its not about talking shit, its about helping people understand ideas, power, money and how to acheve better goals in life. When i frist came here i wanted to drop a V6 into my car. after a day, i learned oh, that wont work very well, ok so i bought a B20.
no one said you couldnt do it, or cant, Just why? And your answer was i have money. You seem to be the one pushing topics about answers you cant back. Dont blow steam up are asses man, lay off the crack.
Just try to understand we are trying to help you understand the aspect of the car, not the engine. You didnt just ask bout the engine, cuz you bosted about droping it into your civic. If you didnt do that, no one woulda said shiiit.
"I'm trying to do a swap for my 2000 civic and looking for a K24 engine. Anybody out there have one or know where I can get one? I know those cars are still new and not many of them have crashed. so hard to find."
That's called Fuuckin boasting?? Dumbassss
11-04-2003 | 04:49 PM
#38
Dancing Banana Driver
Joined: Mar 2002
Posts: 2,022
Likes: 0
From: Reno, NV
Touchy touchy, I like my name, i like my cute white tail, and my tight blue ass 
there is diffrent fourms of boasting, indirect, and direct, you preformed a indirect boast.
Kinda like a sales pitch on the raido "I like shampoo" or "I like head and sholders shampoo" See what i am getting at?
there is diffrent fourms of boasting, indirect, and direct, you preformed a indirect boast.
Kinda like a sales pitch on the raido "I like shampoo" or "I like head and sholders shampoo" See what i am getting at?
11-04-2003 | 04:54 PM
#39
KiMBO's Hubby
Joined: Mar 2002
Posts: 3,488
Likes: 0
From: San Hose Jose
not doggin' you, but i'm just thinking practicality.
it's going to be a bish to attempt such a task alone unless you are fully sponsored by those shops you mentioned and they are going to spend lots of resources on your car.
i'm sure you already considered these factors, but just as a reminder let me list a few:
1.) motor mounts..not sure if HASports or anyone else has a complete drop in yet. :dunno:
2.) spacing. i know it's been done with the other K series before and it doesn't look that nice in there :ugh:
3.) wiring. expect to spend a good amout of time figuring out the wiring diagram and rewiring many of the plugs if not the entire harness. along with that, the countless hours of diagnostics if something isn't working right. :thinking:
4.) cost efficiency. not only is it going to cost alot of money, but all it takes is one little 5cm flange to impede your progress for about.
a month. :rant:
5.) with all that said and done, you'll get attraction and admiration from many out there including myself, but what are you going to do when another honda whoops you while spending farrrrrr less than you? you gonna say "well, at least you don't have a K series in there" and feel better about getting your ass kicked??
** i give you props for thinking on a more original level, but feasiblity and cost don't intersect reasonably on this one.. good luck :thumbup:
** call up HAP in Rancho Cordova.they might have some ideas for you and places to get your motor.
it's going to be a bish to attempt such a task alone unless you are fully sponsored by those shops you mentioned and they are going to spend lots of resources on your car.
i'm sure you already considered these factors, but just as a reminder let me list a few:
1.) motor mounts..not sure if HASports or anyone else has a complete drop in yet. :dunno:
2.) spacing. i know it's been done with the other K series before and it doesn't look that nice in there :ugh:
3.) wiring. expect to spend a good amout of time figuring out the wiring diagram and rewiring many of the plugs if not the entire harness. along with that, the countless hours of diagnostics if something isn't working right. :thinking:
4.) cost efficiency. not only is it going to cost alot of money, but all it takes is one little 5cm flange to impede your progress for about.
a month. :rant:
5.) with all that said and done, you'll get attraction and admiration from many out there including myself, but what are you going to do when another honda whoops you while spending farrrrrr less than you? you gonna say "well, at least you don't have a K series in there" and feel better about getting your ass kicked??
** i give you props for thinking on a more original level, but feasiblity and cost don't intersect reasonably on this one.. good luck :thumbup:
** call up HAP in Rancho Cordova.they might have some ideas for you and places to get your motor.
11-04-2003 | 04:57 PM
#40
my bum is on the swedish!
Joined: Mar 2002
Posts: 10,133
Likes: 0
From: San Antonio, Texas
Originally posted by hybridhondahatch
BTW: you could try to peice a swap together (might be a little eaiser) the k24 also come in a CR-V which has been out longer htan the TSX, and any RSX/SI tranny will bolt to it, and you can use the axels from the si and comp too, just watch out for that whole imobilization thing.
BTW: you could try to peice a swap together (might be a little eaiser) the k24 also come in a CR-V which has been out longer htan the TSX, and any RSX/SI tranny will bolt to it, and you can use the axels from the si and comp too, just watch out for that whole imobilization thing.
but the k24 is also in the new accords and the new elements.
its almost like nissan's new 3.5l engine. They're just using it whenever applicable.
right now? maybe a k24 swap is stupid....
maybe in 5-10 years, tho.... :naughty: