my rear right trailin arm is bent and i found a set of itr trailin arms from a local guy, and was wonderin would my hub fit onto the teg trailin arm? bascially if i can confirm it fits then i would wont have to go to a junkyard pull one off. i check the part numbers for the teggy trailin arms 94-01 they r the same itr/gsr/ls. just wonderin if my si hub w/ my rotor and caliper will fit it. thanks for any help.

 

Good question. i know the rear LCAs are different so it wouldn't surprise me to know that the trailing arms are as well. Let us know what you find out.

 

I'm also curious. I'm about to pick up a wrecked 93 integra LS, and wonder if the rear brake assembly and control arms would fit on a 92-95 Civic HB. If you find some info on compatibility, please post URL:s here.

 

actually the lcas for the teggys 94-01 gsr/ls r the same as our 92-95 civics coupes/hatches only that, it has a hole for mountin a sway. the itrs r different in design as they mount the strut inside the lca. havin said that, the trailin would seen to fit upon guessin that it would but i cant take chances and need an exact answer. someone has to know this.....

 

YES! its been confirm. 94-01 integra trailing arms are the same as the 92-95 civic si hatches with rear disc brakes. once i get this on, my rims r goin on. :yay:

 

wOOt

 

dang. So a '93 doesn't make the cut. 'guess all I need is the motor and tranny (and seats) from this car. Thanks for the help.